Hi Alex, Im, still getting these issues even when uninstalling the other apps, this issue occurs all the time whether other apps are open or not, it didnt happen with the older version of the app, just when I downloaded the new version, its starting to be a bit of a nuisance because sometimes it flashes so often I struggle to configure the device. Its not related to the moth or cable as the old app was fine. I have uninstalled the old app to try and see if this was the issue but still no luck. Any ideas?

Hi Jay, We just purchased the Aquarian H3, which seems similar to the H2 in terms of capability. Just so I can understand your post a little better, is the audio only clear to a frequency of 3 khz when attached to the H2a? And you lose amplitude and fail to hear anything making noise above 30 khz? This is an issue, I have looked at purchasing a pre-amplifier like this one https://www.aquarianaudio.com/pa1.html, but I dont think we can get it in time. In your experience will we struggle to pick up sounds underwater with a dev attached to an aquarian hydrophone?

Im using a mix of the class 10 and higher U3 cards and both function perfectly at 48khz

I would also love this as an option. Is this something that is on the cards as a possibility for a software update?

Hi Alex thanthank you for your reply. So far I have been using this one below and it works perfectly. Is the 1010 class one above the same as I guess it should work if this one does? www.picstop.co.uk/microsd-sdhc/sandisk-ultra-micro-sdhc-memory-card-98mbs-class-10-for-android-32gb.html?gclid=CjwKCAjw_b3cBRByEiwAdG8WqqYEsT70p5kb9ddSLQcc4aqdMy7oBBinoOe6Ls6nMbZQ_DRbBOwBSRoCKUkQAvD_BwE

Thank you I will get in touch with Alistair. Please could you post any details of the materials you used to make yours and what worked better just in case they are not available? Thank you. Jenna

That's great thank you. Do you know how I can order them and roughly what the cost will be? Thank you

Hi Alex, Thanks for the reply. Is the ones that Alistair is getting ready possible to order. Last time I posted this someone replied and said you should have cases ready to sell by September time but that it wasnt guaranteed. If you could confirm if you are ion a position to sell cases that would be great then if you wont be selling any in the coming months I will try to make my own? Thanks. Jenna

Hi, I'm having similar problems, the plastic bags just aren't waterproof in rain storms. Every time it rains and water gets in the bag they stop recording and are flashing green as Jose says, luckily for mine, for now once I dry them out and configure them they start working again but I dont know how long the machines will take this water damage for and I'm loosing a lot of data, if this happens in our main field season in September it will ruin the data. Please can you tell me when these water proof cases will be ready? I will be purchasing 55 units in the next May groupgets and will be using them for a big project out in the tropics but I cant really do it in these bags. Thanks Jenna

Great thank you. do you know when round 4 will on groupgets, roughly? I dont want to miss getting them in time by not ordering in round 3. Also, if we buy the devices before the cases are ready can we purchase the cases separately or will we need to purchase them with the device? Thank you

Thanks Andy I look forward to reading it, Are you able to provide us with anything resembling a training database of the gun shots or even the raw audio files?

Its okay, once I realised it wouldnt change it was easy to manage. I also managed to dounload the timesetter app once I got back to London, it just wouldnt download in Costa Rica! Thank you

Andy, I had massive problems with this. My computer is normally set to UTC as I live in London but when I was out in Costa Rica we were 6 hours behind and I set my computer to that but the audio moth was always showing UTC, it would not change to the time of my computer. Am I right in thinking that it wont change? Jenna.

I'm trying on my pc normally but also downloaded and did it on a piece of software but that didn't work either, it said it formatted but it didnt. They must have corrupted in the devices because they were fine when I out them in.

The remaining data I have on the two kingston cards just wont delete either, its taking about 6 hours to delete the 270 files on one card but then when I plug it back in the files are back there again, so strange!

Hi Andy, The two kingston wont reformat. I tried the two kingston card and the toshiba at 8 and 16 and the kingston ones flash red as if they are recording but when I put them in the computer there are no recordings, at these khz I dont get the flashing then long 20 sec pause, they flash constantly but still nothing to show when plugged in. The toshiba one does not even flash red to show its recording and again nothing when plugged in. The other kingston I have that is the same is working perfectly at 48khz

Hi, The battery is full, 4.1 or 2 v. I have tried reformatting them again on the quick option and the slower option. I have https://www.amazon.co.uk/gp/product/B0046XAROG/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1 and https://www.amazon.com/Toshiba-MicroSDHC-MicroSD-Adapter-PFM032U-1DAK/dp/B00CIR00J4. One of the kingstons works still and the other two dont and this toshiba one I just brought and havent used does not work but as I explained above records for one minute then stops. I'm at a loss with what to do because I have tried reformatting. I dont think I have lost data I think it is just not recording. Im formatting to FA32, I dont kno what MS DOS means in your description online. Thanks. Jenna

Hi Andy, Yes I did get it working when I attached it to the computer, I have so many cables even one with a data line wasnt working but it was fine when I switched it, i still cannot download the timesetter app I am not sure why, I will try when I am back in the UK. The only think I am struggling with it the time signatures on each 60s recording, for example, I just had 4 devices up for a week and I want to use them to localise the animal so I need to be able to identify the same call on each one, but when I hear a call on one device how do I know what file it should be in on each of my other devices because the first files on each device start at a different time, one at 17 47, one at 18 02 and one at 21 09 and there are more files on some than others, is there anyway to correlate this or do I just have to go through all of them? Thanks Jenna

I did thank you, It turns out not all USB cables work, some only charge and don't allow the transfer of information thank you