top of page

Support Forum

Public·1140 members

Hello,

I'm trying to use the hydromoth for a school project to record seabird noises and boat traffic. I have a couple questions if you have a moment for me.

  1. I've downloaded the flash app, clock app, and configuration app. The hydromoth has fully functional batteries, and shows a green light when plugged in to the computer. However, the computer isn't acknowledging the hydromoth and it doesn't show up when I open the apps. How to I proceed to troubleshoot and get it to connect?

  2. Are there any suggestions for what kind of gain I should be using for the hydromoth outside of the water in a somewhat noisy environment? I've read that the hydromoth is a little more muffled than the audiomoth, but also that noises that are too loud can blow out audio recordings if the gain is set too high.

22 Views
Alex Rogers
Alex Rogers
yesterday

Hi, What operating system are you using? The most likely issue that causes communication problems is that the USB cable is a charging cable rather than a data cable. Try another cable that you know works for data transfer. In the first instance try with normal gain range and medium gain. If the recordings are saturating due to the volume, then select 'Enable low gain range' on the 'Advanced' tab in the Config App. Alex

Support Forum

©2026 Open Acoustic Devices

bottom of page