Hi,
for quite a while now we've been successfully using 5v io-li batteries with the first version of the AM. When we try them with the newer devices (from round 6) they don't even turn on (no led flashes at all). Is this change due to a hardware modification or is it has to do with the firmware, and it's therefore amendable without adding or changing any hardware?
Many thanks!
Hi Alex,
Thanks for the quick answer!
We solder the batteries onto the terminals. After following your instructions I've noticed that the only devices that don't work fine are those we welded power cables to yesterday.
Please apologize for rushing the question, I should have double checked that before.
Thanks,