To see this working, head to your live site.

Audiomoth 1.2.0 Stereo compatible ?

I've ordered an Audiomoth 1.2.0 and I'm planning on plugging some Primo EM272 microphones (https://micbooster.com/primo-microphone-capsules/199-primo-em272.html). So, do you know if I can do a stereo-type assembly of these capsules to plug them into the Audiomoth ?

Thanks a lot,

Paul

4 answers2 replies

6 Comments

Share Your ThoughtsSign up to leave a comment.

Paul Coiffard

Dec 07, 2020

Thanks for your feedback. Have you observed a decrease in autonomy due to the need to power the capsules ?

Alex Rogers

Dec 07, 2020

Replying to

Compared to the typical power used in recording to SD card the effect of the external microphone is minimal. There is some additional load when the device is sleeping between recordings and the external microphone is present (due to the current used to detect it) but this only amounts to about 1-2 mAh per day so is not really a factor unless you are doing extremely long deployments with a very sparse recording schedule.

Paul Coiffard

Dec 09, 2020

Replying to

@Alex Rogers Thanks for your detailed answer.

Alex Rogers

Nov 17, 2020

No we just used their standard made-up microphones with the 3.5mm jacks already attached. These work well.

Paul Coiffard

Nov 17, 2020

Thanks for your answer. Have you been able to experiment with different assemblies of capsules ?

Alex Rogers

Nov 17, 2020

AudioMoth works well with the Primo microphones. AudioMoth only records a single channel though so it is mono only.

Audiomoth 1.2.0 Stereo compatible ?

Before posting, be sure to check the FAQ.