Hi, I have a number of Audiomoths, and one of my most recently purchased devices (a 1.2.0) is not working. When I initially programmed it for deployment, it seemed to flash just fine (and is detected as having firmware 1.10.1 on it still). It appears to set the time and configure, but the first time I did this, I got a warning saying that the clock was working too fast. Despite appearing to program, the device did not record. I have since tried new batteries, different SD cards, different cables (always ones that came with the devices) and have tried reflashing, timing, and configuring. During those actions, everything seems okay, but when I eject the Audiomoth and switch it to custom, I get both red and green lights flashing (slower on the first flash, then shorter duration flashes interspersed with a longer no flash interval. This also happens when I switch to default. I have programmed my Audiomoths hundreds of times with success and am familiar with common ways that can cause a problem. I have tried everything I know. Any suggestions?
top of page
To see this working, head to your live site.
Red and green flashing lights despite proper configuration
Red and green flashing lights despite proper configuration
3 comments
Like
3 Comments
bottom of page
Hi, The warning abot the clock is a bug that triggers incorrectly sometimes. This will be fixed in the next version of the Config App so you can ignore that. The red and green LED flashing in DEFAULT means that an SD card write error has occured. What make and model of SD cards are you using, and what sample rate are you recording at? Alex