Thank you very much, it's clear to me now!

O that's great! Thanks for the information. Yannick

Hi Amanda and Alex, hope you don't mind me joining this thread. Alex, I was wondering if there's a more recent update on the approximate release date of those new Dev + GPS devices later in the year. I'm interested in a large order for a triangulation study and I'd like to know if they'd be in time for the scheduled fieldwork. Thanks!

I got it working, thank you very much! As a follow-up question, do you perhaps know what the device's battery consumption rate is during sleep mode? Yannick

Thank you for your response. I have done as you said but still the LEDs both flash when I set the switch to custom. The SD card is inserted and the time set with the application. Do I leave the rest of the scheduleRecording unaltered? And do I have to change anything in configSettings? My code: Yannick

I'm using Windows 10.

Hi Alex, thanks for your explanation! I think I got it working now. The problem was indeed just when flashing the firmware, while the .bin file was fine. With bricking I meant that I got the error "ERROR: Timed out waiting for send confirmation from AudioMoth", combined with the device not responding to anything (switch or USB) until I put it in programming mode and flashed it again. This still happens quite often when I'm trying to flash, but it does flash correctly sometimes (with help of flash -i port) so I can work with that. Might the error be due to the cable I'm using or something? In any case, my problem is solved so thanks a lot!

Thank you. I'm able to get the unedited main.c file to flash now. Two follow-up questions: 1) is it correct that I should edit the defaultConfigSettings under /* USB configuration data structure */ if I want to change the default settings? Because that's what I've tried but it keeps bricking the device. 2) Why don't some of those default values seem to match up with those shown in the Configuration App? For example, .sleepDuration = 0 and .recordDuration = 60, while those are respectively 5 and 10 seconds in the App. Are these converted someplace else?

Hi Alex, thank you very much for your response. I have now tested both the unedited main.c files from the Audiomoth-Firmware-Basic and Audiomoth-Project directories. In both cases, I get no orange highlighted errors, but I do see"[post-build] Error 1 (ignored)" at the bottom of the console. In the first case, the output file is 116 kB and the .hex files indeed starts with :10400000. When using the main.c from AudioMoth-Project, the output file is 20 kB and strangely, there is no .hex file as output. In both cases, the error I get when flashing is this: "ERROR: Timed out waiting for send confirmation from AudioMoth".