Hi Alex, Thank you, but I've tried what you say, without the batteries, with the same paper clip I just used for the other devices, but something goes wrong with this device, I don't know what. Is there a specific ammount of time that I should press the clip against the contacts?

@Alex Rogers That’s exactly what I did —several times- but didn’t work. The flashing app doesn’t find the device.

Hi. One of my Audiomoths failed to update the firmware and now is "dead". I've tried to put it directly to flashing mode as suggested, but nothing happens. The same USB cable was used after this to update other devices and it worked. Are there other options to resurrect my device? Thank you!

I have the same problem but the solution didn't work. I put the clip using custom setting and the card inserted, as shown in the dialog, batteries off, but when I connect the cable, nothing happens. The flash app doesn't find the device. The cable was the same I've used before and it was working til the flashing failure. I've succesfully updated the firmware in another device after this with the same cable. I would appreciate advice. Thanks!

Hi! I want to know what is the temperature measurement for. Is it for the device itself? or is it for the ambient tº? I also need to know if this feature is available for the new version of the hardware or it could be activated from v. 1.0.0. Thank you!

@Peter Prince thank you. I decided to make it in my iMac instead and all went fine. I have a question related with the hardware. One of my devices got wet after a rain and still works but creates recordings showing just white noise. Any opportunity to save de mic by doing some cleaning work? Thanks!

I think the screenshots are not uploading as needed!

@Peter Prince Thanks Peter, I'm still having the error message. I copied the flash.exe file into the new folder in my desktop, but after a wile it appears with 0KB size. I don't understand why and if this could be the problem or not...

Hi Peter! Me and my friend are trying to update the firmware of our audiomoths but have problems with the flash process. We are using Windows 10, and we cannot execute flash in the command window (we cannot open a command window in the folder, because the default option is PowerShell. If we open a command window and try to execute flash, an error message shows up: "The process does not have acces to the file because it is being used in another process). Any leads on what could be the problem? Thanks a lot!